Settlng
the
Shutter Speed
Dlal
-
The
shuiler speed setting can be
changed before or after
film
winding
operation.
.
The
shutter
is released
at
1/500
sec., regardless of the settings
when the battery is not loaded, or
battery
power
is insufficient for
normal shutter operation.
Depress the shutter
release
button
with a smooth,
gentle
action. Do not
force
or
jerk.
-
Following the shutter release, a
red-colored LED will light up
momentarily in the front central area
of the finder and will indicate that
the exposure
has
been completed.
Carefully observe this red LED,
especially when a slow
shutter
speed
is released. Do not wind
the
film
before the
red
LED
lights
up or
you
will forcefully terminate the
camera operation before
it is
comoleted.
The
shutter blades
will
close
and
there will be under-exposure
if the
film winding
crank
is
accidentally
rotated before
the
exposure
is
completed, as
in
the case of a slow
shutter speed setting.
In this
case,
the next
frame may
also be
exposed
and result in an
improper
exposure as
well.
.
Although the battery will not be
drained by an accidental
shutter
release
button depression,
it is
strongly
recommended that
you
lock
the shutter
release button by
rotating the locking ring and
coincide
the
orange
dot to
"L"
when
16
To Next Page
Loading...
Need help?
General
