Bronica SQ-B User Manual

Shutter
Release
Button
camera is not in
use
to
prevent
accidental
shutter
release.
-
The
shutter
release
button
will not
be operable
in
such cases listed
below as a
part
of camera's
safety
measure
to
prevent
improper
camera operations.
1.
Shutter
release
button is locked.
2. Dark
slide
is inseded.
3.
Film is not
advanced.
(Same
when
exposure counter
is
between
"S"
and
"1".)
4.
Shutter
is not
cocked.
5. Lens
is
not attached
properly.
(Same
with
automatic extension
tubes, too.)
6. Lens release
button
is
de-
pressed.
7. All frames
(i.e.,
12 frames
for
120 roll film
and 24
tor
220 roll
film) have
been exposed.
Time exposure is not
possible
with
the PS/B
80
mm lens
supplied with
the
SQ-B camera
kit.
When
one of other Zenzanon-PS
lenses is
attached, time exposures
can be
made with
the time
exposure
lever
on the lens,
regardless
of the setting on the
shutter
soeed scale.
A. First,
cock the shutter with the
film
winding crank
and
then
pull
up
the time
exposure
lever lock
release.
B.
Slide
the time
exposure
lever
and
release
the shutter, when a red-
colored
"T"
is
exposed on the lens
barrel.
The
shutter will stay open
until
the time
exposure lever is
moved in
the opposite direction,
exposing the
letter
"A",
which will
close the shutter.
-
Except for
time exposures, always
shift the time exposure lever
so that
the letter
"A"
is visible
on the
lens
barrel
and
keeo
the time exoosure
lever
lock release
oushed
in
all the
way.
17

Bronica SQ-B Specifications

General

Brand	Bronica
Model	SQ-B
Category	Digital Camera
Language	English