To Next PageTo Next Page
Need help?Do you have a question about the Bronpi Agatha and is the answer not in the manual?
General| Type | Wood Stove |
|---|---|
| Material | Steel |
| Heat Output | 8 kW |
| Log size | 50 cm |
| Fuel Type | Wood |
| Color | Black |
| Smoke outlet diameter | 150 mm |
Key safety rules for installation and operation.
Measures to protect wooden beams from heat.
Requirements for chimney installation and operation.
How natural convection works in inserts.
Requirements for chimney cowls.
Proper placement and requirements for air intake.
Assembly instructions for specific models.
Steps to pair the remote control and receiver.
Channelling system for Alicia Extra stove.
Channelling system for Neva Extra insert.
Channelling for 12KW stoves.
Channelling system for Damasco model.
Daily procedure for cleaning the burner.
How to use scrapers for smoke chamber cleaning.
How to empty and clean the ash pan.
Maintenance of door and glass seals.
Procedure for cleaning the chimney.
How to clean the stove glass safely.
Methods for cleaning the stove's exterior.
How to clean registers for warranty validity.
Preparations for long-term storage.
Overview of scheduled maintenance tasks.
Explanation of remote control and display functions.
How to use the stove's display buttons.
Guide to remote control button functions.
Accessing and navigating the stove's menu system.
User interface for controlling stove operation.
Notification for low pellet levels.
Reminder for scheduled maintenance.
Warning for high smoke temperature.
Indicates elevated temperature of the electronic board.
Alarm for power interruption.
Alarm if smoke probe fails.
Alarm for excessive smoke temperature.
Alarm for smoke fan malfunction.
Alarm indicating failure to ignite.
Alarm for flame extinguishing during operation.
Alarm for overheating of internal tank parts.
Alarm for pressure change in combustion chamber.
Alarm for insufficient primary air flow.
Alarm for malfunction of the fuel feed motor.
Alarm for flow sensor anomaly.
Comprehensive table of alarms, causes, and solutions.
Conditions for warranty to be considered valid.
Conditions under which warranty is invalid.
Items and situations excluded from warranty coverage.
Manufacturer's exclusion of liability for damages.
Steps to take for abnormal model operation.
