High Eciency Step Down Converter
Instruction Manual
Bronson HE-D Series
Models: HE-D 3000, HE-D 4000, HE-D 5000
The Bronson HE-D Series converts the standard mains voltage from 220-240
Volts (Europe & UK) to 110-120 volts required for most American devices. Due
to toroidal core technology the Bronson HE-D Series is energy efficient both in
standby mode and under electrical load and will provide reliable protection for
your connected equipment. This manual is a guide to install and use the
converter. It includes important safety instructions for the operation and correct
installation of the converter. If you should have any problems with the
converter, please refer to this manual before contacting customer service.
Remarks: This model is single phase. Waveform is Pure Sine Wave and
without distortion.
Before operating this product, please read these instructions carefully.
Thank you for selecting this Bronson HE-D Step Down Converter.
To Next Page
Loading...
