Instruction Manual
Bronson TI Series
Models: TI 200, TI 300, TI 500, TI 800,
TI 1000, TI 1500, TI 2000
Thank you for selecting this Bronson TI Step-up/Step-down Converter.
The Bronson TI Series enables voltage conversions between 110-120 V AC
and 220-240 V AC. Due to Toroidal Core Technology the Bronson TI Series is
energy efcient and provides reliable protection for your connected equipment.
This manual is a guide to install and use the converter. It includes important
safety instructions for the operation and correct installation of the converter. If
you should have any problems with the converter,please refer to this manual
before contacting customer service.
Remarks: This model is single phase. Waveform is Pure Sine Wave and
without distortion.
Before operating this product, please read these instructions carefully.
Step-up/Step-down Toroidal Core
Voltage Converter
Step-up/Step-down Toroidal Core Voltage Converter
To Next Page
Loading...
