Home > Scan > Configure Scan Settings Using Web Based Management > Set the Scan Job Email Report
Using Web Based Management
Set the Scan Job Email Report Using Web Based Management
Related Models: ADS-1800W
When you scan a document, the machine will send a scan job email report automatically to the registered email
address.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the bottom of the machine and
marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Scan > Scan Job e-mail report.
If the left navigation bar is not visible, start navigating from
.
5. In the Administrator Address field, type the email address.
6. For the scan functions you want, select Enabled to send a scan job email report.
7. Click Submit.
Related Information
• Configure Scan Settings Using Web Based Management
Related Topics:
• Access Web Based Management
105
To Next Page
Loading...
