Brother ADS-1300 - Configure Your Wi-Fi Direct Network Manually

Home > Network > Wireless Network Settings > Use Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network
Manually
Configure Your Wi-Fi Direct Network Manually
Related Models: ADS-1800W
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press
[Settings] > [Network] > [Wi-Fi Direct] > [Manual].
2. The machine will display the SSID (Network Name) and Password (Network Key). Go to your mobile device's
wireless network settings screen, select the SSID, and then enter the password.
If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi
Direct network setup.
Related Information
• Use Wi-Fi Direct
®
Related Topics:
• Wi-Fi Direct Overview
• Configure Your Wi-Fi Direct Network Using the Push Button Method
121