Home > Network > Network Features > Reset the Network Settings to Factory Default
Reset the Network Settings to Factory Default
Related Models: ADS-1350W/ADS-1800W
You can use your machine's control panel or Web Based Management to reset the machine's network settings to
its default factory settings. This resets all information, such as the password and IP address.
>> ADS-1350W
>> ADS-1800W
ADS-1350W
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the bottom of the machine and
marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Administrator > Reset Menu.
If the left navigation bar is not visible, start navigating from
.
5. In the Network section, click Reset.
The reset confirmation message appears.
6. Click Yes to restart your machine.
To reset the network settings to factory default using machine's control panel, open the Front Cover, and
then press and hold and simultaneously for five seconds.
ADS-1800W
1. Press
[Settings] > [Network] > [Network Reset].
The reset confirmation message appears.
2. Press [OK] for two seconds.
The machine will restart.
Related Information
• Network Features
138
To Next Page
Loading...
