Brother ADS-1300 - Configure Active Directory Authentication Using Web Based Management

Home > Security > Use Active Directory Authentication > Configure Active Directory Authentication Using
Web Based Management
Configure Active Directory Authentication Using Web Based
Management
Related Models: ADS-1800W
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the bottom of the machine and
marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Administrator > User Restriction Function.
If the left navigation bar is not visible, start navigating from
.
5. Select Active Directory Authentication.
6. Click Submit.
7. Select the Active Directory Authentication menu.
8. Configure the following settings:
Option Description
Remember User ID Select this option to save your User ID.
Active Directory Server
Address
Type the IP address or the server name (for example: ad.example.com) of the
Active Directory Server.
Active Directory Domain
Name
Type the Active Directory domain name.
Protocol &
Authentication Method
Select the protocol and authentication method.
Get Mail Address Select this option to obtain logged on user's email address from the Active
Directory server. (Available for the LDAP + kerberos or LDAP + NTLMv2
authentication methods.)
Get User's Home
Directory
Select this option to obtain your home directory as the Scan to Network
destination. (Available for the LDAP + kerberos or LDAP + NTLMv2
authentication methods.)
SSL/TLS Set an SSL/TLS option to use SSL/TLS communication. (Available for the
LDAP + NTLMv2 authentication methods.)
LDAP Server Port Type the port number to connect the Active Directory server via LDAP.
(Available for the LDAP + kerberos or LDAP + NTLMv2 authentication
methods.)
175