App. 4-1
Confidential
APPENDIX 4 HOW TO MAKE PROTECTIVE MATERIAL OF DRUM UNIT
Make the protective material of drum unit by the following procedures, and use it at the time of packing.
<Procedure>
(1) Pass the Paper strip through the hole of Protective material. (The white surface of Paper
strip is the upper side.)
(2) Pass the end of Paper strip through the hole of Paper strip, and then pull the end of
Paper strip to the direction of the arrow.
Fig. APP. 4-1
Protective material Paper strip
Paper strip
Protective
material
Protective
material
Protective
material
To Previous Page
Loading...
