Brother DCP-J925DW - Choosing the Right Print Media; Document Sizes Supported

Chapter 4
22
Setup to receive polling with secure
code
4
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If you want to get a fax from a
secured Brother machine you have to enter
the secure code.
a Press (FAX).
b Press d or c to display
Advanced Settings.
c Press Advanced Settings.
d Press a or b to display Polling RX.
e Press Polling RX.
f Press Secure.
g Enter a four-digit secure code by
pressing the buttons on the
Touchscreen.
This is the same as the security code of
the fax machine you are polling.
Press OK.
h Enter the fax number you are polling
using Speed Dial or the dial pad on the
control panel.
i Press Mono Start or Colour Start.
Setup to receive delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (FAX).
b Press d or c to display
Advanced Settings.
c Press Advanced Settings.
d Press a or b to display Polling RX.
e Press Polling RX.
f Press Timer.
g Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
h Enter the fax number you are polling
using Speed Dial or the dial pad on the
control panel.
i Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.