Brother GT-3 Series - Page 138

6. Replacing Parts
4.
Remove the t
wo Bolt Sockets (6) and disconnect the Belt Setting Plate (7) from the Platen Arm (8).
(6)
(8)
(8)
(7)
5.
Remove the f
our Bolt Sockets (9) and remove the Belt Holder (10).
(9)
(10)
6.
Remove the
Platen Belt.
<Note> Go to the page “Replacing the Reduction Belt” and follow “Disassembling” when you replace the
Reduction Belt at the same time.
GT-3 Series
129