Brother GT-3 Series - Pump Tube

6. Replacing Parts
6-1-19. Pump Tube
Required Tools
・Nippers
・Phillips screwdriver of 70mm long
1. Turn OFF the printer.
2. Remove the Cover DB and the Cover PB in the back, and the Cover DL and the Cover PF in the front.
(Refer to “6-1-2. Assembling/Disassembling of the Covers”.)
Suction Pump Assy
3. Remove the t
wo Screws (1) that fix the Pump Holder.
(1)
(1)
4. Disco
nnect the Pump Tube (3) that is connected to the Drain Plug (2).
(3)
(3)
(2)
(2)
GT-3 Series
178