2. Identifying Your Printer’s Parts
2-5. Upper part of the Maintenance Unit
0048Y
No. Name Description
1 Caps (Front: Color side) Cover the surface of the Print Heads and absorb ink in head cleaning.
From the left black, magenta, cyan, and yellow.
2 Caps (Back: White side) Cover the surface of the Print Heads and absorb ink in head cleaning.
From the left W1, W2, W3, and W4.
3 Wipers (Color / White) Wipe off waste ink from the surface of the Print Heads. To maintain good print quality,
clean them every week, and whenever the Wiper Cleaner is replaced. See "5-2-1.
Replacing the Wiper Cleaner and Cleaning the Caps / Wipers".
4 Wiper Cleaner
(Front: Color side)
Removes the waste ink on the Wiper. Exchange regularly and keep them clean for print
quality, at the timing when you open the new ink cartridge or when you see the warning
on the display of Control Panel. Remove the projections of both sides and lift it up. See
"5-2-1. Replacing the Wiper Cleaner and Cleaning the Caps / Wipers".
5 Wiper Cleaner
(Back: White side)
6 Flushing Plate Sponge
Flushing Plate Felt
Hold the flushed ink for keeping print quality.
Replace them regularly. See "5-2-3. Replacing Flushing Plate Sponge and Flushing
Plate Felt".
GT-3 Series
12
To Next Page
Loading...
