Brother GTX-4 - The Edges of the Image are Blurred, Characters and Straight Lines are Doubly Printed and Printed Result Appears Too Granular; Thin Color Cannot Be Printed Out Well Gradually; White Ink is Not Printed Out Evenly

6-50
Disassembly / Replacement / Adjustment
Assembly
(1) To perform the assembly, take the reverse procedures to disassembly operation.
<CAUTION>
 Be sure not to touch the encoder strip as much as possible.
And, check the up and down orientation of the encoder strip. The lower half of it is transparent.
<TIPS>
 There may be difficulty in the assembly of the nylon rivet. Providing for spares is recommended.
(2) While putting the encoder strip into the slit attached to the frame, try to assemble the nylon rivet.
Slit