Brother GTX-4 - Page 12

3
Installation
Check the supplied accessories.
a AC power cord
s Cable clamp
d Grease
f Clean stick R x 6 / Clean stick T x 6
g Cleaning cup
h Filter cover / Fan filter x 2
j Gloves (for changing the wiper cleaner / for cleaning the
maintenance unit) x 4
k Carriage fixing pin
l Tweezers
; Flushing receiver x 2 / Flushing foam x 2
A Waste ink tank
S Waste ink tube fixing rubber
* The rubber is already attached to the waste ink tube of the
machine.
D Print head x 2
F Rear cover installation screw x 2
* Screws are already fixed with the machine.
G Rear cover
H Wiper cleaner
J Adult platen
K Setup Manual (this manual)
①②③④
⑤⑥ ⑦ ⑧
⑨⑩ ⑫
⑬
⑪
⑯
⑰⑱
⑮⑭
X0286