148
Basic printing procedures
(4) Slide the platen bearing downward, and fix it in position temporarily with the platen fixing lever.
The number of collars and the position of the screw hole for the platen bearing differ by the height of the platen adjusted.
<TIPS>
If you are setting the platen's height to the lowest position, remove all the collars and fix the platen bearing at its highest
screw hole temporarily.
If you are setting the platen's height to the middle position, attach one collar and fix the platen bearing at its middle screw
hole temporarily.
If you are setting the platen's height to the highest position, attach two collars and fix the platen bearing at its lowest screw
hole temporarily.
X010
(5) Attach the platen height adjustment lever to the platen bearing.
X010
Platen fixing lever
Platen height adjustment lever
Platen bearing
Platen bearing
To Next Page
Loading...
