Brother GTX-4 - Page 181

181
Precautions to keep good printing quality/use printer over the long term
(4) Wipe the resin part between the print head's nozzle surface and nozzle guard.
<IMPORTANT>
 Be sure not to touch the nozzle surface as well as the level surface and sidling surface of the nozzle guard.
X017
2
Cleaning conditions
Pre-cleaning state Post-cleaning state
(5) Rinse the clean stick R in the cleaning cup to use it for cleaning of the wiper to be performed next.
<IMPORTANT>
 Be sure to use the clean stick R separately for white ink and color ink.
X0173
Clean this part
Resin part
Resin part
Resin part
Nozzle surface
Nozzle guard