Brother GTX-4 - Page 254

254
Troubleshooting
Install White Ink After Cleaning
(1) Make sure the message [Install White Ink After Cleaning] is displayed on the liquid crystal panel.
<TIPS>
 Perform the work operation by following the on-screen instructions.
(2) Take out the maintenance solution cartridge from the printer.
<TIPS>
 The bottom of the cartridge may be soiled with ink.
W12 W34
X0039
(3) Open the cartridge's lid.
<IMPORTANT>
 When opening the lid, be sure not to touch the portion (a). Otherwise, it could be damaged.
 Place the entire cartridge on a flat surface, push the latches on the bottom surface of the cartridge downward and open the
lid.
(a)
X0042
Maintenance solution cartridge
Lid
Cartridge
Latch Lid