Brother GTX-4 - Page 266

266
Troubleshooting
(9) Unlock the print head, and remove the print head.
②
①
X0131
(10) Release the lock by pulling (a) part toward yourself, and take out the new print head from its case.
<IMPORTANT>
 When removing the print head, be careful not to touch the nozzle surface at the bottom of the head. Otherwise it may cause
poor printing.
<TIPS>
 Sometimes, you may find it hard to remove the print head when you try to open the lock of (a) part. If it is hard, use both
hands to remove it.
X006
9
Lock
Print head
Case
Print head
(a) part