Brother GTX-4 - Page 70

To Next Page

To Previous Page

Creating print data

(4) Make your settings for the printer driver.

<TIPS>

 For details of the printer driver's setting procedures, refer to "5-3. Printer driver's setting from Graphix Lab >>P.71".

 Older versions of the printer driver may display an error [A driver of corresponding version is not found. (-1401)]. If so,

please update the driver to the newest version.

(5) When you click [Print], the dialog box shown below will be displayed on the screen. After that, click [Save].

<TIPS>

 When you use a Macintosh to output a file by means of "Brother GTX-4 FileOutput", activate the "GTX-4 FileViewer" first,

then click [Print]. If you try to output and send a file without activating it, an error will occur and the file cannot be saved to

the system.

 There may be cases where this saving process takes several minutes.

(6) Specify the [Save In] and [File name] first, then click [Save] to save the ARX4 file to your PC.

Other manuals for Brother GTX-4