Brother GTX-4 - 5-3-1. For Graphix Lab: Selecting a Printer

72
Creating print data
5-3-1. For Graphix Lab: Selecting a printer
From [Printer], select a destination printer to send print data.
<TIPS>
 If the specified [Printer] is set to "Brother GTX-4", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX-4 FileOutput", the print data will be saved as an ARX4 file.
5-3-2. For Graphix Lab: Creating/selecting preset
From [Preset], a printer driver setting can be saved, deleted, or selected.
When repeatedly using the same setting for creating print data, it is recommended to save the preset data.
Saving preset data
Create your settings of printer driver and click [Save Preset].
Enter a preset name and click [Save] to save the preset.