Brother GTX pro - Set up the White Ink

100
Creating print data
Double Printing
Performing the print cycle two times separately will make the printed color stand out more.
Setup value Description
[0] No separate processes
[1] Separate processes (wait time between the 1st and 2nd print cycle)
[2] Separate processes (longer wait time than the case with setting [1] between the 1st and
2nd print cycle)
[3] Separate processes (longer wait time than the case with setting [2] between the 1st and
2nd print cycle)
<TIPS>
 For the options [1] to [3], the platen will reciprocate two times.
 The higher the setpoint is, the longer the print time will be.
5-4-8. Set up the white ink
If you have selected [Color+White Ink] or [White Ink Only] in the [Select Ink:], this setting menu will be enabled.
When you click on the [Advanced] in the [Printing Preferences] dialog box, the setup items of [White Ink Settings]
appear.
In the [White Ink Settings], you can make settings for [Transparent Color:], [Tolerance:], [Minimum Whiteness :],and
[Choke Width:].