Brother GTX pro - Loading Print Data (ARXP File) from USB Flash Memory

158
Basic printing procedures
6-6-3. Loading print data (ARXP file) from USB flash memory
(1) Insert a USB flash memory into the insertion slot near the operation panel of the printer.
<IMPORTANT>
 Do not apply undue force to the USB flash memory when you insert it into the slot. Otherwise, it could be damaged.
<TIPS>
 Please use a FAT32-formatted USB flash memory of which storage capacity is 2 GB to 32 GB in total. You cannot use a
USB memory with security functions such as password lock function or beyond 32 GB.
 Note that the data which can be loaded from the USB flash memory is only the data in the ARXP or ARX4 format.
X003
8
(2)
From the menu, select [Print Data Load], and press
.
<TIPS>
 The information on file is shown on the liquid crystal panel.
(3)
Select a filename to be printed out, and press
.
<TIPS>

Selecting
will display the file stored in .
 Folders in the USB flash memory are shown down to the 3rd layer. Folders created in the 4th layer or below are not
displayed.
USB flash insertion