Brother GTX pro - Replacing the Platen Sheet

207
Precautions to keep good printing quality/use printer over the long term
7-2-5. Replacing the platen sheet
When the platen sheet gets soiled, replace it with a new one.
(1) Remove the platen from the main unit of the printer.
☞ "6-4-1. Replacing the currently used platen with another one >>P.134"
(2) Peel the platen sheet off the platen.
<TIPS>
 When it is hard to peel the platen sheet off, warm it using a hair dryer or the like and peel it off.
X006
4
(3) Wipe the surface of the platen with a clean cloth moistened with a mild detergent which is diluted with water, then
wipe the platen clean with a dry and soft clean cloth.
(4) Mount the platen in the main unit of the printer.
☞"6-4-1. Replacing the currently used platen with another one >>P.134"
(5) Peel the release paper (small in size) off a new platen sheet.
X0157
Platen sheet
Platen
Platen sheet
Release paper (small)