Brother GTX pro - 8 What to Do When Needed

227
8
What to do when needed
As required, make settings and adjustments as mentioned below.
About menu layer on the setting screen
Menu Setting screen Description
[Printer Setting]
[Print Direction]
[Auto]
[Always Bi-Directional]
[Always Uni-Directional]
[Back Light]
[Light High]
[Light Medium]
[Light Low]
[Auto Screen Erase Time]
[No Auto Screen Erase]
[5 min]
[10 min]
[15 min]
[30 min]
[Menu TimeOut Setting]
[1min]
[3min]
[5min]
[Speaker Volume] 0 to 7
[Temperature]
[Fahrenheit]
[Centigrade]
[Preview display settings]
[display it upward]
[display it downward]
[File name display setting]
[Priority to file name display]
[Priority to job name display]
[Platen Obstacle sensor]
[Check when platen is loading]
[Check during printing as well]
[Platen too low sensor]
[Enable]
[Disable]
[Low Temperature Mode]
[Enable(Normal)]
[Disable]
[Auto Cleaning Setting] 1 to 24
[Auto Cleaning Start Timing]
[Conduct before Printing]
[Conduct after Printing]
[Flushing Interval Setting]
[every 40 lines]
[normal 22 lines]
[every 10 lines]
[every 6 lines]
[Flushing Volume Setting]
[More]
[Standard]
[Less]
[Wiping frequency]
[Standard]
[Medium-high]
[High]
[Auto Job Delete]
[OFF]
[ON]
[IP Address Set]
[Manual setting]
[Automatic acquisition]