Brother GTX pro - Test Print and Print Data Load Menu Options; Receiving History, Maintenance, and Printer Settings Menus

35
Menu list
1st layer 2nd layer Description
[Test Print]
[Nozzle Check CMYK]
This is the test pattern to check to see if ink-jet droplets are
ejected from the color heads properly or not.
[Nozzle Check White]
This is the test pattern to check to see if ink-jet droplets are
ejected from the white head(s) properly or not.
[Print Data Load]
With this menu item, any print data stored in a USB flash
memory (ARXP or ARX4 file) is loaded into the system.
[Receiving History]
By selecting this menu item, you can display any print data
received in the order in which they are sorted from the
newest to the oldest ones, and you can select any one of
them.
[Maintenance]
[Maintenance Part Clean/Replace]
Use when performing printer maintenance.
[White Ink Circulation]
[Head Replacement]
[Install Ink after Replacing Head]
[Initial Ink Installation]
[Exchange color filter]
[Printer transport preparation]
[Log copy to USB]
[Printer Setting]
[Print Direction]
Use when configuring the printer.
[Back Light]
[Auto Screen Erase Time]
[Menu TimeOut Setting]
[Speaker Volume]
[Temperature]
[Preview display settings]
[File name display setting]
[Platen Obstacle sensor]
[Platen too low sensor]
[Low Temperature Mode]
[Auto Cleaning Setting]
[Auto Cleaning Start Timing]
[Flushing Interval Setting]
[Flushing Volume Setting]
[Wiping frequency]
[Auto Job Delete]
[IP Address Set]
[Network filtering]
[Shortcut button]
[Cartridge Attach/Remove Check]
[CR Speed Adjustment]