63
Installation and preparation
4-4-3. Connecting the printer to your PC via a LAN cable
When you connect your Macintosh to the printer via a LAN cable, configure the IP address settings for the printer,
referring to the Instruction Manual.
Subsequently, perform the procedures below to add the printer to your PC.
(1) Connect your PC with the printer by means of the LAN cable to make a network connection, and power on the
printer.
<TIPS>
For this connection of the LAN cable, secure it in place by means of the cable clamp as required.
(2) From the Apple menu, open the [System Preferences] and click on the [Printers & Scanners].
(3) After that, click the + button in the lower-left corner.
(4) Select [IP].
To Next Page
Loading...
