15
REMOVING INK & DEBRIS ACCUMULATION
2
CLEANING UNDER THE CARRIAGE
3
Remove any dried ink ink & debris
accumulation [like above] that are
protruding under the Nozzle face of the
Print Heads.
If you touch the Nozzle face, nozzles may be damaged. Use gloves and pinch with a
cleaning stick or fingers to remove. DO NOT use hard objects like tweezers.
Clean the under face of the carriage like indicated below:
Use a Clean Stick R or waste cloth to clean the area:
• Absorb ink droplets wth Clean Stick R.
• Wipe off mist like ink buildup with a lint free cloth
EXAMPLES
REMOVING INK & DEBRIS ACCUMULATION
Location of Nozzle faces
Location
Cleaning Area Close-up
To Next Page
Loading...
