Brother GTX600 Series - Detailed Cleaning of Nozzle Guards

16
> Do not empty remaining Cleaning Solution from the Cleaning Cup into the
Maintenance station but rather empty it into the Waste Tank below the printer.
R
Clean Stick
> Do not forget to remove any ink and debris accumulation that could appear
under the nozzle face and carriage.
DETAILED CLEANING OF NOZZLE GUARDS
4
Wipe clean the 2 nozzle guards & with the Clean Stick R dipped in GTX600 Cleaning
Solution [1 for White Ink and 1 for CMYK Ink to avoid cross color contamination].
A very important place to clean is area between the nozzle guard and nozzle plate.
Be sure NOT to touch the Nozzle surface at all.
4
2
31
4
2
3
1