19
CLEANING BEFORE AND AFTER REPLACING THE MIST FAN FILTER
2
Use a Clean Stick R or Clean Stick T to clean the areas specified in the pictures below.
All loose debris needs to be removed with a vacuum cleaner.
Clean the areas where you can see ink mist and lint debris which has formed while printing.
Clean the edges of the 2 clearance areas. Remove all the dirt and vacuum them.
Remove all the dirt accumulated in the 2 openings and then vacuum them.
RIGHT SIDELEFT SIDE
LEFT SIDE
When finished cleaning and vacuuming, you can install the 2 new Mist Fan filters.
CLEARANCE
MIST DEBRIS
To Next Page
Loading...
