4-55
Creating print data
4-6-9. Position adjustment for the 2 heads of the same color
Check the position of the print head.
(1) From the "Useful Tools," click "HEAD POSITION ADJUSTMENT_C.arx6" or "HEAD POSITION
ADJUSTMENT_W.arx6" to download data.
(2) Send the data to the printer and perform printing.
(3) Check the print result to make sure the position adjustment has been set correctly.
4-6-10. Platen feed adjustment
Check whether or not the platen feed adjustment is appropriate.
(1) From the "Useful Tools", click "FEEDING PATTERN(1).arx6" to download data.
(2) Send the data to the printer and perform printing.
(3) Check the print result to make sure the platen feed adjustment has been set correctly.
To Next Page
Loading...
