5-8
Basic printing procedures
(3) Orient the pour spout of faucet in the position as shown in the figure below.
(4) Pour the pretreatment with the carton into the container for dilution and dilute the pretreatment with pure water.
<IMPORTANT>
Dilute the pretreatment three times (pretreatment with pure water at the ratio of 1:2 by volume).
Close the lid of the container for dilution and stir the content well to make the concentration uniform.
(5) To provide safekeeping for the pretreatment, close the faucet, place the pretreatment with the faucet part facing
upward, and store the entire carton in a safe place.
X0081
X008
Pretreatment
Faucet
Pretreatment
Pure water
Container for dilution
To Next Page
Loading...
