5-33
Basic printing procedures
5-9. Removing printed matter from platen
(1) Hold the shoulder portions of print medium with your hand, and pull it out slowly in the forward direction indicated.
<IMPORTANT>
Because the printed surface is still wet with ink, avoid touching it.
If any ink is attached to your hands, wash your hands with soap and water.
Those inks that are attached to fabrics cannot be cleaned up, please handle the inks with utmost care.
<TIPS>
The printed ink is not fixated at this point - therefore, handle the T-shirt with care to avoid the printed surface touching with
other objects.
X104
T-shirt
To Next Page
Loading...
