Brother GTX600NB - Replacing the Platen Sheet

6-30
Precautions to keep good printing quality/use printer over the long term
6-1-11. Replacing the platen sheet
When the platen sheet gets soiled, replace it with a new one.
(1) Remove the platen from the main unit of the printer. ☞"5-4-1. Replacing the currently used platen with another one
>>P.5-14"
(2) Peel the platen sheet off the platen.
<TIPS>
 When it is hard to peel the platen sheet off, warm it using a hair dryer or the like and peel it off.
(3) Wipe the surface of the platen with a clean cloth moistened with a mild detergent which is diluted with water, then
wipe the platen clean with a dry and soft clean cloth.
(4) Mount the platen in the main unit of the printer. ☞"5-4-1. Replacing the currently used platen with another one
>>P.5-14"
(5) Peel the release paper (small in size) off a new platen sheet.
X102
7
X1028
Platen sheet
Platen
Platen sheet
Release paper (small)