6-57
Precautions to keep good printing quality/use printer over the long term
6-2-3. Cleaning the surrounding area of nozzle surface
(1) Make the clean stick R, cleaning cup, gloves and cleaning solution, which come standard with the printer, available
for use.
<IMPORTANT>
Use a new clean stick R when you start cleaning.
Never touch the tip end of clean stick R with your hand. If any sebaceous matter is attached to the head nozzle, it may
result in the printer malfunction.
(2)
From the menu, select [Maintenance] > [Maintenance Part Clean/Replace] > [Clean nozzle guard and cap], and
press .
<IMPORTANT>
If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
Please complete the task within 15 minutes, in order to prevent the print heads from drying up.
Then, the head cleaning will be performed to prevent any ink from drying up.
<TIPS>
Pressing causes the platen to start moving. Do not put anything around the platen.
(3) Unlock and open the right-hand-side cover.
Keyhole
To Next Page
Loading...
