EasyManua.ls Logo

Brother GTX600NB - Disposal of Waste Ink and Waste Water

Brother GTX600NB
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-60
Precautions to keep good printing quality/use printer over the long term
6-2-4. Disposal of waste ink and waste water
If a warning message appears on the operation panel screen or in the warning message window, dispose of the waste
ink and the waste water in the tanks.
<IMPORTANT>
It takes about two years for the waste water tank to be filled up with water.
When the waste ink tank accumulates, and an error occurs, treat the water in the waste water tank at the same time.
<TIPS>
Warning messages will be displayed for the respective tanks when the waste ink and the water in the waste water tank are about
half full. However, these messages are not due to a malfunction of the detector.
(1)
From the menu, select [Maintenance] > [Empty/replace waste ink tank], and press .
Follow the menu to complete the process.
(2) Open the lower left-hand-side cover.
Waste ink tank full
Humidifier drain tank full
! WARNING

Table of Contents

Other manuals for Brother GTX600NB

Related product manuals