1-9
Before Using Your Printer for the First Time
No. Name Function
1 Top cover Open this cover when cleaning the internal area of the printer.
2 Carriage Holds the print head.
3
Obstacle sensor
Checks the presence of any obstacles by their height (such as wrinkled T-shirt)
that are within range to collide with the print head.
“Platen too low” sensor Make sure that the clearance between the head and platen is not too large.
4 Platen sheet
It helps to keep the T-shirt from moving/shifting during printing so that an image
can be clearly printed.
5 Platen Set the T-shirt to be printed.
6 Shoulder bar Align the position of a T-shirt with this bar.
7 T-shirt tray
This T-shirt tray holds such portions of T-shirt that droop down on it and feeds
the entire T-shirt into the printer.
8 Platen fixing handle
Use this handle to secure the platen in place.
Tighten or loosen it when attaching/removing the platen. Keep it tightened
when printing.
9 Mist fan filter It absorbs ink mist which is generated inside the printer on its surface.
10 Operation panel Operate the printer using this panel.
11 Print button
There is no print data when this button remains off. This button blinks during
reception of print data, and it illuminates when such reception is completed.
Printing will begin if you press this button when it is illuminated.
12 Stop button
Press either one to cancel operations, such as printing and platen movement.
Printer will come to a stop after necessary actions for keeping the printer's good
quality, such as retracting operation of print heads and capping operation, are
completed.
13 Monitor mounting frame You can mount the monitor by using the monitor arm.
To Next Page
Loading...
