Brother GTX600NB - Platen Setting; User Settings for Height; Configuring the Obstacle Sensor to Work During the Printing Process

7-7
What to do when needed
7-9. Platen Setting
7-9-1. User settings for height
There are custom positions that can be set to any height.
(1)
From the menu, select [Printer Setting] > [Platen settings] > [Height settings by user], and press
.
(2) Set the desired position.
7-9-2. Configuring the obstacle sensor to work during the printing process
Specify the detection mode of the obstacle sensor by selecting either [Check when platen is loading] or [Check during
printing as well].
(3)
From the menu, select [Printer Setting] > [Platen Setting] > [Obstcl sensr settng during print], and press
.
(4)
Select the obstacle sensor setting and press
.
<TIPS>
 During this menu selection process, the currently selected set value is displayed.
 The obstacle sensor is intended to detect wrinkles of the print media or foreign object on it to prevent the print head from
contacting wrinkles or foreign matter or minimize the time during which the contact continues.
 If the print head comes into contact with wrinkles or foreign object, a failure to eject ink-jet droplets or a mechanical failure may
occur.
 If the obstacle sensor detects a foreign object, the printing process and the platen operation are immediately stopped.
 If you select [Check when platen is loading], the obstacle sensor works only while the platen is moving from the front to the rear.
 If you select [Check during printing as well], the obstacle sensor works during the period from when you press the print button to
when the printing process completes.
Obstcl sensr settn
g
durin
g
p
rin
t
Check when platen is loading
Check during printing as well
OK
Hei
g
ht settin
g
s b
y
user
User settings 1
User settings 2