1-12
Before Using Your Printer for the First Time
1-4-4. Inside the cover
<IMPORTANT>
If you put your hands inside the cover during regular maintenance while the power is on, follow the instructions in this manual.
No. Name Function
1 Print head (front: on the color side) It ejects the color ink.
2 Print head (rear: on the white side) It ejects the white ink.
3 Carriage linear guide This shaft supports the carriage.
4 Maintenance unit
In order to keep good printing quality, this unit performs maintenance
functions to the print heads on a regular basis. (Example: Auto-Cleaning
Function)
5 Caps (color, white)
The caps protect the color and white head surfaces and suck ink when
cleaning the heads.
6
Wiper unit It wipes away ink from the head surface.
Wiper cleaning tank
(Under the wiper unit)
This tank keeps cleaning solution and soaks and cleans the wiper.
7 Flushing foam
To keep good printing quality the foam absorbs the ink-jet droplets ejected
from the print head.
8 Flushing receiver Set the flushing foam.
9 Carriage locker solenoid
To prevent drying of print heads, it fixes the carriage to the cap position of
the maintenance unit.
10 Carriage foam It absorbs ink and prevents printed materials from being stained.
1
2
9
3
4
6
7
8
5
5
10
To Next Page
Loading...
