3-6
Installation and preparation
3-3-2. Turning off the power
When you need to turn off the power
Turn off the power in the following cases.
When moving the printer elsewhere.
In the event that the power supply interruption is anticipated in advance, including the case where a planned
power outage is scheduled.
How to turn off the power
(1)
From the menu, select [Prepare Power OFF] and press
.
If the printer is operating, wait for it to finish.
(2) Cleaning will start at the end of the print job.
Follow the instructions on the panel and turn off the power.
<IMPORTANT>
No cleaning will be performed at the end of the print job to keep the print heads in good condition if you turn the power off or
disconnect the AC power cable before the operation of [Prepare Power OFF] is completed. In these cases, the print heads
may fail to eject ink-jet droplets. For this reason, be sure to activate the printer once again and perform the head cleaning
after activation.
To Next Page
Loading...
