Brother GTX600NB - When There Is no Prospect of Electric Power Recovery for a While Due to Power Outage

3-7
Installation and preparation
3-3-3. When there is no prospect of electric power recovery for a while due to power outage
Print head capping will be performed to prevent the print heads from drying out if there is a power failure while the printer
is operating and no prospect of recovery for a while.
<IMPORTANT>
 Be sure to turn off the power switch before starting work.
<TIPS>
 Perform the work specified below when no print heads are capped, e.g., when a power failure occurs during printing. The
specified work is not required if the print heads are capped.
(1) Unlock the upper left-hand-side cover and top cover and open them.
(2) Remove two screws to remove the cover.
Screw
Cover
Keyhole
Keyhole