3-11
Installation and preparation
3-4-1. Installing printer driver onto your PC
To begin with, on your PC, install the printer driver for file output, "Brother GTX-6 FileOutput".
At this stage, do not connect the printer to the PC yet.
<TIPS>
You must log into your PC with administrator privileges.
(1) Activate the PC.
(2) Complete all of the current sessions.
(3) Double-click on the "setup.exe" to execute the installer.
(4) Then, the installation procedures will begin. Follow the on-screen instructions to complete the installation.
(5) When the dialog box shown below appears, click [Install].
(6) After the installation is completed, reactivate the PC.
To Next Page
Loading...
