3-12
Chapter4 Installation and preparation
3-4-2. Connecting the printer to your PC via a LAN cable: Adding a printer to PC
Before connecting via LAN, refer to ☞"7-18. Static IP address setting >>P.7-14" and set the IP address for the printer.
Then, add the printer to your PC according to the procedure specified below.
(1) Connect your PC with the printer by means of the LAN cable to make a network connection, and power on the
printer.
<TIPS>
For this connection of the LAN cable, secure it in place by means of the cable clamp as required.
(2) Select [Settings] > [Devices] > [Devices and Printers].
(3) Click the [Add a printer].
(4) Select [The printer that I want isn't listed].
To Next Page
Loading...
