Brother GTX600NB - Sending Print Data Using Brother GTX-6 Fileoutput (for Macintosh Only)

4-3
Creating print data
4-2. Sending print data using Brother GTX-6 FileOutput (for Macintosh only)
Saving print data to a file
Check that the "GTX-6 File Viewer" is running when saving print data to a file using the "Brother GTX-6 FileOutput"
printer.
The error shown below will occur, and you will not be able to save the data if you output without "GTX-6 FileViewer"
running.
<TIPS>
 Depending on the application, the following error may or may not appear. Try again with the "GTX-6 FileViewer" running.
<TIPS>
 The procedure for outputting a file from "Brother GTX-6 FileOutput" is the same as that for a Windows PC.
Sending print data
Follow the procedure below to send print data to the printer if the print data has been saved using the "Brother GTX-6
FileOutput" printer.
<TIPS>
 The procedure for sending print data is the same as that for a Windows PC.
(1) Double-click the file with the extension .arx6 saved using the "Brother GTX-6 FileOutput" printer.
(2) "GTX-6 FileViewer" will be launched, and the file will be sent when you click [Send to Printer].