Brother HE-800A - 11 Changing Functions Using the Memory Switches



HE-800A
11. CHANGING FUNCTIONS USING THE MEMORY SWITCHES
78
㧝㧝
. CHANGING FUNCTIONS USING THE MEMORY SWITCHES
x The memory switch settings are valid for all programs (program Nos. 1 to 90).
x When a memory switch number is being displayed in the program number LED, a dot will appear after the memory
switch number. (Example: 00.)
1. Press the SELECT key (1) to change the mode to program mode.
2. While pressing the ENTER key (2), press the program NO. UP key (3).
* The memory switch number "00." will appear in the program number LED (4), and the setting for that memory
switch number will appear in the parameter display LED (5).
3. Press the program NO. keys (3) and (6) to select the number for the memory switch to be changed.
4. Press the parameter keys (7) and (8) to change the memory switch setting.
* The memory switch setting will flash while it is being changed.
5. Press the ENTER key (2) to accept the new setting.
* The memory switch setting will stop flashing and illuminate steadily.
6. Press the SELECT key (1) to change the mode to automatic mode.
3991Q