HE-800C
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
31
5-2. Starting the sewing machine
1
Push the power switch (1) to the ON side.
The power indicator (2) will illuminate and the contents of the panel
display (3) will switch in the order shown below.
2
Depress the treadle (4).
・ The needle bar and the work clamp will move to the home
position.
・ The operation panel display will show the standby condition*1 for
the mode that was active when operation last stopped (if it was
automatic sewing mode, test feeding mode or program mode).
*1: The “standby condition” is the name for the period from the point after switching to one of these modes until the first
operation occurs.
Displayed for approx. 2 second
Sewing area
4208B
4209B
4917M
4780M
4784M
To Next Page
Loading...
