Brother HE-800C - Using the STOP Switch; Pausing Sewing During Automatic Sewing

HE-800C
6. USING THE SEWING MACHINE (SEWING OPERATION)
51
6-3. Using the STOP switch
6-3-1. Pausing sewing during automatic sewing
The STOP switch is used to stop the sewing machine if a problem occurs such as a thread breakage.
<Pausing sewing>
Press the STOP switch (1) while sewing is being carried out.
The sewing machine will stop and the buzzer will
sound.
<Clearing the pause (when not continuing from the point where sewing was paused)>
1
Press the RESET key.
(The display will change alternately.)
The buzzer will stop sounding.
2
Eliminate the cause of the problem.
3
Press the RESET key once more.
The needle bar and the work clamp will carry out home position detection, and then
they will return to the sewing start position.
4225B
4224B
4226B
4320B
4223B
Flashin
g
Off