7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)
HE-800C
60
7-5. Changing the production counter setting
If memory switch no. 302 is set to “2-PRODUCT”, the production counter will appear in the lower-right of the display during
automatic sewing mode. The counter number will increase by “1” for each pattern (or each cycle) that is sewn.
1
Switch the mode to automatic sewing mode.
Production counter
2
While the sewing machine is at standby, hold down the ENTER key and press the key.
(The mode will switch to production counter setting mode.)
3
Set the counting value (1).
* When the counting value is changed, (1) will flash in the
display.
* If you would like to return the setting to “0”, press the
RESET key.
4
Apply the changed setting.
The mode will return to automatic sewing mode.
NOTE:
If you press the AUTO key while the counter value (1) is flashing, the mode will return to automatic sewing mode and the
setting will not be changed.
4863M
4792M
4222B
4234B
4212B
4931M
4867M
4932M
To Next Page
Loading...
