Brother HL-1202 - Software; Remote Printer Console (Windows HL-1200(E) and HL-1202(E) Only); Software for Networks (HL-1210 W(E) and HL-1212 W Only)

Driver and Software
36
2
Software 2
Remote Printer Console (Windows
®
HL-1200(E) and HL-1202(E) only) 2
Remote Printer Console is software to change many of the printer settings independently of your application.
For example, you can change the settings for printer margin and so on. These settings are then remembered
and used by the machine. The application and printer driver settings will take priority over the Remote Printer
Console settings.
NOTE
Not available to countries subject to applicable export regulations.
How to use and install the Remote Printer Console software 2
To use the Remote Printer Console software, follow the steps below.
a Put the supplied installer CD-ROM into your CD-ROM drive and close the opening screen when it
appears.
b Open Windows
®
Explorer and choose the CD-ROM drive.
c Double-click the tools folder.
d Double-click the rpc folder.
e Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
Software for networks (HL-1210W(E) and HL-1212W only) 2
For the information about network utility software, see the Network User’s Guide.